TOYOPUC-PC10G-1SP
High-performance CPU function at 0.015 μs/word for basic commands, 0.05 μs for application commands
Program capacity of 180K steps, equipment information memory of 4 Mbytes
Standardly equipped with a myriad of communication functions
SFC programming is supported (compliant with IEC61131-3)
※SFC（Sequencial Function Chart）
1. Features of TOYOPUC-PC10G-1SP
TOYOPUC-PC10G-1SP is a compact programmable controller with a high-speed computing function (minimum 0.015 μs/instruction), large capacity equipment information memory (4 Mbyte for standard) and a multitude of communication functions.
-
High-performance CPU function
Various sequence programs such as "Equipment control," "Equipment diagnosis," and "Information processing" can be executed by high-speed processing using basic commands and application commands that are 0.015 μs/instruction and 0.05 μs/instruction, respectively. With more than 700 kinds of application commands, signed operation and floating point arithmetic are possible.
-
Large capacity memory
The large capacity equipment information memory (4 Mbyte) stores helpful information useful for adjustment of equipment or maintenance work, such as comments, project, SFC and I/O diagram.
The memory capacity of the basic and common areas for each program has been significantly expanded. Due to the expansion of the basic area, it is possible to store the history of up to 64 CPU alarms events. A large capacity expansion flash register of 4 Mbyte can also be used. -
A myriad of communication functions
Ports L1 and L2 allow for the selection of FL-net, Ethernet, FL-remote M, EtherCAT-M*1, or EtherNet/IP*2 capable of 100 Mbps communication. Built-in Ethernet is capable of 32 ports opened simultaneously.
Port L3 allows for the selection of communication with SN-I/F, PC-LINK, CMP-LINK (computer link), or MODBUS.
By using USB 2.0 in connection with PCwin, reading and writing of the program have been achieved at a higher speed than conventionally possible. -
SFC programming is supported (compliant with IEC61131-3)
The SFC enables visualization of "operation progress for individual equipment processes," which was difficult to understand with conventional LD (ladder) programming, using flow charts. FBD can be used to standardize ladder circuits in units of functions, facilitating the reduction of drawings and reuse of equipment.
LD (ladder) can also be exclusively used for programming.- *SFC (Sequential Function Chart)
- *FBD (Function Block Diagram)
2. Various new functions
3. General specifications
| Item | Specification | |||
|---|---|---|---|---|
| Power source |
POWER1: AC85～264V 47～66Hz POWER2: DC18～32V※ POWER2H：DC18～32V※ ※Please use a power supply compliant with: IEC/EN60950-1, EN50178 (UL Class SELV) |
|||
| Consumption power |
POWER1: 38W or less (80VA or less) POWER2: 40VA or less POWER2H: 50VA or less |
|||
| Ambient temperature | 0～55℃ | |||
| Relative humidity | 10～95%RH (But no condensation allowed) | |||
| Atmosphere | No corrosive gas allowed. | |||
| Vibration resistance | Frequency | Acceleration | Amplitude | Sweep cycles |
| 5～8.4Hz | - | 3.5mm | 10 cycles in each of 3 directions (1 octave/min) | |
| 8.4～150Hz | 10m/s2 | - | ||
| Shock resistance | (150 m/s² 3-directions each 3 shocks) | |||
| Noise resistance | Complies with European EMC directive EN61131-2. | |||
| Dielectric strength | AC1500V 1 minute (between AC external terminal and earth) AC1000V 1 minute (between DC external terminal and earth) |
|||
| Insulation resistance | DC500V 10MΩ or more (between AC external terminal and earth) DC100V 10MΩ or more (between DC external terminal and earth) |
|||
| Instantaneous power failure | POWER1: Allowable time 0.5 cycle or less, Period 1s or more POWER2: Allowable time 10ms or less, Period 1s or more POWER2H: Allowable time 10ms or less, Period 1s or more |
|||
| Overseas standard | North America CSA/NRTL acquired Europe corresponds to CE mark RoHS |
|||
4. Response to electromagnetic environment (EMC)
| Item | Standard | Specification | |
|---|---|---|---|
| Static electricity | IEC61000-4-2 | Air discharge | ±8kv |
| Contact discharg | ±6kv | ||
| Burst test (Fast transient test) | IEC61000-4-4 | Signal line | ±1kv |
| DC power line | ±1kv | ||
| Functional earth line | ±1kv | ||
| Surge | IEC61000-4-5 | Line to ground | ±1kv |
| Conducted interference of radio frequency electromagnetic field | IEC61000-4-6 | Frequency range | 0.15～80MHz |
| Voltage level | 10V (rms unmodulated) | ||
| Modulation method | 80%AM modulation (1kHz) | ||
| Radiated, radio frequency electromagnetic immunity | IEC61000-4-3 | Frequency range | 80～1000MHz |
| Voltage level | 10V (rms unmodulated) | ||
| Modulation method | 80%AM modulation (1kHz) | ||
5. Control specifications
| Item | PC10G-1SP | PC10G |
|---|---|---|
| Model | PC10G-1SP | PC10G |
| Programming method | Stored program method | ← |
| Program control method | Cyclic operation method, Constant period interruption function | ← |
| Programming language | SFC, LD, FBD | ← |
| I/O control method | Image register method | ← |
| Basic instruction processing speed | 0.015 μs ~ / instruction | ← |
| Application instruction processing speed | 0.05 ~ several μs / instruction | ← |
| Basic instructions | 20 kinds | ← |
| Timer/counter instructions | 23 kinds | ← |
| Application instructions | 700+ kinds (Signed operation possible, Floating point arithmetic possible) | ← |
| Program capacity | 180K words (60K words x 3) (Selectable from 60K words/60K words/60K words, 120K words/60K words, 180K words) |
← |
| + 60K words (FB library) | ← | |
| + Standard library 32K words | ← | |
| + User library 32K words | ← | |
| Memory element | MRAM, FLASH memory | CMOS-RAM, EEPROM |
| Battery | None | Rechargeable (Lithium secondary battery: 5 years life) |
| External I/O points | 2048 points | ← |
| Internal output points | 86,016 points (4,096 pts x 3 + 8,192 pts + 65,536 pts) | ← |
| Keep relay points | 6,400 points (768 pts x 3 + 4,096 pts) | ← |
| Timer functions |
0.1~6553.5 sec / 0.01~655.35 sec 0.001~65.535 sec / 1~65,535 sec (Total 9,728 points) |
← |
| Counter functions | 1~65,535 (2,560 pts x 3 + 2,048 pts) | ← |
| Link relay points | 38,912 points (10,240 pts x 3 + 8,192 pts) | ← |
| Rising/falling detection | 11,776 points (2,560 pts x 3 + 4,096 pts) | ← |
| Data register |
164K words/16 bit (12K words x 3 + 128K words) Expansion buffer register: 256K words Flash register: 4 Mbyte, Flash memory (read only) |
← |
| Link register | 6K words/16 bit (2K words x 3) | ← |
| Equipment info memory | 4 Mbyte | ← |
| Special module install amount |
Communication (link) module: Max 24 No limit by memory consumption |
← |
| Built-in comm function |
L1 port: FL-net / Ethernet / FL remote M / EtherCAT-M / EtherNet/IP L2 port: FL-net / Ethernet / FL remote M / EtherCAT-M / EtherNet/IP L3 port: SN-I/F / PC-LINK / CMP-LINK / MODBUS |
← |