Back to list

Product information

TOYOPUC-PC3JX-D series

Go to manual
download page

TOYOPUC PC3JX-D

Successor model able to replace PC3JD.
In addition to enhanced functions, usability is improved through USB connection with a computer and battery-free design.

TOYOPUC PC3JX-D

1. Features of TOYOPUC PC3JX-D

1. As a successor of the PC3J series

PC3JX-D support the data of PC3JD.
Ladder circuits and built-in communication functions remain usable.

2. As a main PLC of equipment control

As a CPU of the main PLC for equipment control, PC3JX-D provide stable high-speed control performance and various control functions. Support visualization (SFC*1,FB*2) and highly functional calculation.
Aging control equipment for machine tools can be easily rebuilt.
These models also conform to EU RoHS.

3. Main usability

  • The connection with PCwin has been changed from the RS-422 serial port (D sub 15 pin) to USB.
    Programs can be read and written in short time.
  • The terminal block for built-in communication has been changed from the screw type to the no-screw type.
    There will be no screw loosening and tightening error.
  • No battery is required.
    Battery replacement does not need to be controlled, and no replacement cost is necessary.

4. Performance and functions

  • High-speed processing has been achieved, such as reducing the basic command processing time to a quarter of the original time.
  • The index function, signed arithmetic and floating-point arithmetic can be used. (Plus expansion mode)

2. Performance specifications

Specifications Conventional model Successor model
PC3JD PC3JX-D I/O-328G
Type TIC-5642 TCC-6902 THK-6905
Product appearance TOYOPUC PC3JXの製品画像1 TOYOPUC PC3JXの製品画像2 TOYOPUC PC3JXの製品画像3
Connection with PCwin*3 RS-422 USB －
Built-in link No. of ports (with options) 2 2 －
Used with the 4-wire system
of PC/CMP		 － ○ －
Model PC/CMP PC/CMP/SN-I/F/*4
MODBUS/SIO		 －
DeviceNet*5 master (1port) DLNK-M equivalent DLNK-M equivalent －
Program
capacity		 P1/P2/P3 Each 16K language Each 16K language －
FB/standard/user library 32K language/-
/32K language		 Each 32K language －
Program
language		 LD ○ ○ ○
SFC/FB － － －
Event monitor － ○ ○
Processing
speed		 Basic command (min. value) 0.08μs 0.021μs －
Application command (min. value) 0.72μs 0.08μs －
CPU
operation mode		 PC 3 divisions/single/PC2 ○ ○ －
Plus expansion － ○ －
Equipment data memory 448Kbyte 4Mbyte －
I/O points 1024 points 1024 points －
Interruption － － －
Battery Yes No －
Built-in I/O Input 32 points (5 mA)
Output 16 points (0.3 A)
Output 16 points (0.05 A) 		－ Input 32 points (5 mA)
Output 16 points (0.3 A)
Output 16 points (0.05 A)
  • ＊1 SFC（Sequencial Function Chart）
  • ＊2 FB（Function Block）
  • ＊3 Use PCwin Ver.14.9 Rev.1 or higher
  • ＊4 Only the L2 communication port can be used.　
  • ＊5 DeviceNet is a registered trademark of Open DeviceNet Vendor Association Inc.
Back to list