TOYODA
JTEKT
telephone number

Contact Us

Machining Centers5-axis horizontal spindle machining centers

FH1250SX-5Axis

  • FH1250SX-5Axis

5-axis machine achieving large parts machining at a top level

Outline

  1. Large range of workpieces and strokes in the class
  2. Stabilization of machining accuracy through the adoption of a tilt spindle
  3. Low-heat-generating spindle making the machining of hard material such as aluminum and titanium possible
FH1250SX-5Axis

Specification

Specification

Standard specifications Special specifications
Table & Pallet
Table dimensions (pallet dimensions) mm □1,250(Pallet) 1,250×1,600
Rotary table indexing angle ° 0.001°(NC)
Pallet height (from floor) mm 1,500
Max load on pallet kg 5,000
Table indexing time (90°indexing) sec 5.6
Pallet change time sec 85
Stroke
X×Y×Z-axis mm 2,200×1,600×1,850
A-axis ° -100~+45
B-axis ° 360
Distance from spindle endface to table center( with spindle at 0°) mm -150~1,700
Distance from spindle center to pallet upper face( with spindle at 0°) mm 100~1,700
Distance from spindle endface to pallet upper face( with spindle at -90°) mm -250~1,350
Distance from spindle center to table center( with spindle at -90°) mm 200~2,050
Max. workpiece swing × Max. workpiece height mm φ2,400×1,800
Feeds
Rapid feedrate (X,Y,Z) m/min 32,32,42
Rapid feedrate (A) min-1 30
Cutting feed rate (X, Y and Z) m/min 0.001~30
Ball screw diameter (X,Y,Z) mm φ63(X),φ50(Y,Z)
Spindle
Spindle speed min-1 50~10,000
Spindle diameter (front side bearing inner diameter) mm φ110
Spindle nose shape BT No.50
Spindle drive motor short time/continuous kW 30/25

[ ]Shows optional specifications.